Querying, monitoring and remote control.
The command module allows to monitor the status of the connected modules and to remotely send control commands with SNMP and through WEB interface (maximum 12 modules).
It is fitted with Ethernet interface, however, during the installation and maintenance process, it is not necessary to connect the computer as the integrated Wi-Fi interface can manage the system directly from smartphone or tablet.
The WEB interface of CMD is specifically designed to encourage its usage through mobile devices.
You can monitor in real time both the applied voltage and loading parameters and send on/off/power cycle commands.
Data interpretation is made even easier by the possibility to rename and comment the connected devices.
A simple caption coloured in red, green or grey allows the prompt identification of the disabled devices and alarms.
|Input Voltage||10-60 Volts DC|
|Max Consumption||< 3 W|
|Ports and interfaces|
|Management Port||1 x RJ45 10/100 Mbit/s|
|Controlled Devices connection||1 x Bus interface|
|Power input||2 x 1.5 mm2 wires terminal blocks and PoE on Ethernet port|
|Status Indicators||3 x multicolor LEDs port|
|GRN Connector||4 mm lug|
|Management and Control|
|First configuration||Web interface through ethernet or WiFi|
|Management||Web interface and SNMP|
|Max units managed||12 units (12 ASPIs or 11 ASPIs + 1 APSU)|
|Operating Temperature||-40/ +55°C|
|Operating Humidity||5% - 90%|
|Storage temperature||-40/ +85°C|
|Dimensions (LxWxD)||88x150x36 mm.|
|Enclosure Material||Varnished Iron|
Gigabit High Power Surge Protection
Gigabit Surge Protector Injector with Active Protections